The Daggerboard Trunk

For a pretty straightforward item, assembling and finishing this part seemed to take forever.  The main issue was not realizing that there is supposed to be a very slight curve to the bottom of the trunk to conform to the bottom of the interior hull.  I didn't realize this right away and had to back up a step in the assembly, which took a couple of extra days.  I had epoxyed the wrong side of one of the planks and had to coat the other side before gluing it together.

Night time temperatures are now down in the 40's and 30's again which really slows up the cure times.  Epoxy that would cure and be ready for sanding overnight a couple of weeks ago now has to sit for 48 hours due to the low temps, even with the help of my incandescent shop light.

Anyway its now done and ready for sanding and installing under the center seat.  All three seats are also sanded and ready for installation.